| There
are 4 different training courses available to attend at this time.
See below for details. If you would like to attend one of
these classes, you MUST contact Solidyne Technical Support by
calling 847-394-3333 x312 and reserve your seat. You also must
be a registered dealers to sign up. We do NOT train end users,
only our direct customers.
The M2 Control System 101
(2 day class)
This class covers everything that you would need to know about the M2 control system.
It covers hardware installation of M2 Universal, M2V VAV and M2D
controllers and peripherals to utilizing the ICMS software to
program and commission these systems. This is a hands on class and a
majority of the class will be ICMS programming instruction. If you
are a new dealer, this is the class to attend.
i3 from A to Z (1 day
class)
This class covers all aspects of the i3-3220 and i3-6412 including
advanced web page creation using the SiteSpinner web page creation
software.
iNET Server for M2 Systems
(1 day class)
The iNET Server is a browser based control system monitoring and
integration device that allows contractors the ability to
bring in open protocol devices such as RTU, boilers and chillers,
etc, with LON or BacNet comm cards in them to a front end monitoring
system. This class covers installing, configuring and deploying iNET
Server on an M2 system along with instruction on integrating to LON
and BACnet/IP systems.
The sLON Control System 101
(5 day class)
This class primarily focuses on the WorkPlace Tech programming
software for all sLON controllers. If you a new sLON customer, this
is the class to take. These classes are scheduled periodically
and will be announced here and via email to our dealers. For
more information, please call Adem Erturk @ x312.
All classes begin at 8:30am CST and end at 4:00pm CST and costs
are per person. All computer equipment will be provided but
attending with your own laptop is recommended. There is $0 cost if you are attending M2 or sLON
101 classes as part of your startup packages |
